• EN
  • World market leader
  • Sustainability
  • Solutions
    • Fire protection curtains

      Fire protection curtains

      In case of fire, fire protection curtains close wall and ceiling openings. Their construction (roll-down or folding technique) and the use of different fabrics provide for a wide range of applications as well as different protection goals, classifications and time classes. The casing and guide rails of the highly flexible systems blend almost invisibly into the building and allow plenty of scope for sophisticated architecture and open room concepts.

    • Conveyor system closures

      Conveyor system closures

      Various production and logistics processes call for the most diverse types of conveyor systems. If these conveyor lines pass through fire-retardant or fire-resistant walls or ceilings, the openings required for this purpose must be provided with fire protection closures to prevent the spread of fire through the conveyor system or the goods conveyed. In the event of fire, conveyor system closures (CSC for short) must close these openings immediately and automatically. Fire resistance classified according to DIN EN 13501-2 is just as important as the smooth clearance of the closing areas in the event of a fire.

    • Smoke curtains

      Smoke curtains

      A smoke apron is a part of a smoke control system which also includes other components such as natural smoke and heat exhaust ventilators (EN 12101-2) and mechanical smoke and heat exhaust ventilators (EN 12101-3). Smoke aprons restrict the movement of combustion gases within a building in case of fire.

    • Smoke protection curtains

      Smoke protection curtains

      Once closed, smoke protection curtains (SPC) restrict the passage of smoke during the phase of fire formation, so that in the event of a fire, there is enough time to rescue people and animals from the room behind the curtain and to recover material assets without the need for respiratory equipment.

    • Tube sealings

      Tube sealings

      The solution for issues with fire protection dampers in ventilation and air conditioning systems in conveyor processes. Stöbich offers fire protection for pneumatic conveyor lines the closing elements of which are not exposed to the flow of conveyed material. This way, the closing element cannot be damaged or contaminated by abrasive conveyed goods.

    • Control units

      Control units

      Each automatic fire protection system needs a control unit. They are critical to safety, because a failure of this function means that the entire investment into a fire protection sealing has been in vain. Control units coordinate both fire detection and interaction with other control units, such as higher-level building control systems or clearing of the closing area of conveyor system closures.

  • References
  • Theme worlds
  • News
  • Contact

SYSTEM: BR 100 (ALSO WITH FAST RUNNING FUNCTION)

BR100

Product description

Single or double-leaf, vertically or horizontally closing fire protection closure for wall openings of track-bound conveyor systems; for scheduled open or scheduled closed system status; for separated and unseparated continuous conveyor technology in the closing area.

TypeFire protection closure in the course of rail-bound conveyor systems
VerificationETA-16/0851 European Technical Assessment (BR 100 EU) | Z-6.6-2089 General building authority approval/general type approval (BR 110 D) | VKF Technical Information No. 32801 (BR 100 E)
Closing directionfrom top to bottom | from bottom to top | from left to right | from right to left | horizontal double leaf closing to the centre
Fire resistanceUntil EI2 90 | tested according to EN 1366-7:2004 | classified according to EN 13501-2:2007
Closing cyclesUntil C5 | 200.000 closing cycles | classified according to DIN EN 13501-2:2007
Reopeningmotorised or manual
Conveyor systemsBelt conveyor technology | Suspension chain conveyor technology | Roller conveyor technology | Electric monorail system | Power & Free
Visible surfacesGalvanised, RAL

Downloads

BR100

Key to system components:
1 = Housing
2 = Guide rails
3 = Counterweight
4 = Shut-off element
5 = Drive motor
6 = Control with operating unit

Size dimensions and system structure

The specifications of the individual product versions with regard to classification, system size and required wall quality of the BR 100 series can be found in the respective data sheets.

The installation situation must comply with the building regulations of the country of installation. The fire resistance of a ceiling or wall supporting structure and the neighbouring components must at least correspond to that of the fire and/or smoke protection closure/fire and/or smoke protection curtain. Proof of the stability and serviceability of the neighbouring walls and components must be provided under general ambient conditions and in the event of fire. See also notes on the standard load-bearing structure in EN1366-7:2004 or EN1363-1:2020. The fire protection system must not be exposed to any additional load other than its own weight, even in the event of a fire.

Contact Share on Facebook Share on Linkedin Share by E-Mail Copy URL Start Tour